An open concept kitchen in Folsom creates the space your home has been waiting for. Our structural team never cuts a wall without first verifying load paths.
Every open concept project starts with a structural assessment -- JMT Kitchen Cabinet understands what is in that wall, what is above it, and exactly what it takes to remove it safely and legally.
Full removal of load-bearing walls with proper structural transfer to an LVL beam or steel header. We handle every step from assessment through permit, framing, and drywall repair.
DetailsLaminated veneer lumber beams and engineered steel headers carry the structural load above the removed wall. Proper beam sizing is calculated based on span width, load above, and lumber species.
DetailsThe most requested open concept conversion. We unify kitchen and living room into a single connected living space, managing the structural transition, flooring continuation, and ceiling integration.
DetailsOpening the kitchen to the dining room creates a seamless entertaining zone. We manage the structural work, utility rerouting if applicable, and cosmetic finishes to unify both spaces.
DetailsNot every space calls for full removal. A partial wall with a pass-through or a lowered knee wall can create connection and light while maintaining some visual definition between zones.
DetailsOpen concept work in Folsom typically requires a structural permit. We prepare and submit the permit application, work with the inspector, and close the permit out properly upon project completion.
Details
The appeal of an open floor plan is immediate and obvious -- but they are also among the most frequently mishandled renovations in the residential market, and the consequences of getting the structural work wrong range from cracked drywall and sagging ceilings to catastrophic structural failure years after the project is complete.
The first step in any open concept project is determining whether the wall you want to remove is load-bearing. A load-bearing wall transfers the weight of the structure above it -- floors, walls, and roof assembly -- down to the foundation. Removing it without replacing that load path with an engineered beam causes the structure above to deflect, sag, and eventually fail. The signs of an improperly handled load-bearing wall removal often do not appear immediately -- they develop over months and years as the structure settles into its new, unsupported geometry. JMT Kitchen Cabinet performs a thorough structural assessment before any wall is touched because there is no ethical way to commit to a wall removal without first knowing what is in that wall and what is carrying load through it.
When a wall is confirmed to be load-bearing, it must be replaced by a properly engineered header or beam -- typically an LVL (laminated veneer lumber) beam, a steel I-beam, or a built-up lumber header sized by an engineer. The beam must be sized for the span it will cover and the load it will carry, and it must be supported at each end by posts or doubled studs that transfer the load back down to the foundation. Using an undersized beam -- a common shortcut taken by crews who do not involve an engineer -- creates a structure that appears sound immediately after installation but deflects under load over time, opening cracks in adjacent walls and eventually compromising the floor structure above.
Utilities inside walls are the other major variable. Most walls in kitchens and adjacent rooms contain electrical wiring, and many contain plumbing or HVAC ductwork. All of this must be assessed before demo begins so they can be properly rerouted before the wall is removed. Cutting through an active drain line or severing a live electrical circuit mid-project creates expensive additional work and safety risks that are entirely preventable with proper planning. JMT Kitchen Cabinet identifies and resolves every utility conflict as part of the project scope so there are no surprises once demo begins.
Wall removal projects that involve load-bearing walls require a structural permit in most jurisdictions, including most municipalities in Folsom, PA. Unpermitted structural work can prevent a home sale, require expensive remediation, and void homeowner's insurance coverage for related damage. We handle permit applications as part of every structural project we take on.
Understanding the beam installation helps explain why this work requires licensed expertise.
The beam size is determined by the span width it must cross, the tributary load above it, and the lumber species and grade. A 12-foot span carrying a floor load above requires a meaningfully heavier beam than a 6-foot span under a roof only. These calculations require an engineer or engineer-stamped span tables.
Before the load-bearing wall is removed, temporary support walls must be built on both sides to carry the load during demo. These temporary walls stay in place until the permanent beam is installed and confirmed in bearing. Skipping temporary supports risks ceiling and floor system damage during the removal phase.
The beam must be supported at both ends by adequate vertical structure carrying the load back to the foundation. This typically means doubled or tripled king studs on each end of the beam opening, sized to carry the beam's concentrated load all the way down through the floor system to the foundation.
A flush beam is installed within the ceiling framing so the finished ceiling is continuous. A drop beam hangs below the ceiling line and is often wrapped in drywall or wood to create a deliberate architectural feature. The choice affects ceiling height, visual design, and the framing approach used during installation.
Before they touched anything -- the JMT Kitchen Cabinet crew spent time looking at the wall from the attic, checking what was above it, and then explained exactly what the beam would need to be. We knew exactly what we were getting before demo started. The result is perfect.
Navigating the Folsom permit office seemed overwhelming but JMT Kitchen Cabinet handled everything -- the drawings, the application, the inspection. We did not have to do anything except approve the plan. And the open kitchen we got is worth every bit of the process.
Three contractors before JMT Kitchen Cabinet said the wall could not come down before JMT Kitchen Cabinet came in, did a proper assessment, and showed me exactly how it could be done. The beam installation is invisible in the ceiling and my kitchen is now one room with my dining area. I should have called them first.
Call today to schedule a free structural assessment and learn what it would take to open your kitchen.
Schedule a Free Consultation